Tall Airtight Rice Storage Container For Pantry

Tall Airtight Rice Storage Container For Pantry

This container was drawn for one job: holding the staples that arrive in a large bag and then sit in a cupboard for weeks. Rice is the clearest case. It is bought in a quantity no ordinary canister holds, it is the dry good most likely to cake when humidity gets in, and in a warm kitchen it is where pantry moths appear first. At 10.5 litres a full household sack goes in as it is, and a four-side snap-lock lid closes down over a grey silicone gasket so the contents live in a sealed box rather than a folded-open bag.

We are deliberate about what it is not. It is not microwave-safe, and it is not trying to be the container for everything in the kitchen - there are smaller canisters for nuts, coffee beans and snack portions. This one is for the bulk purchase, and for the problems that bulk purchases bring: moisture, air, insects and the transfer of smells between what is stored and what is stored next to it.

The body is clear PET, which at this size does two useful things at once - you can read the remaining level without lifting the lid, and the walls stay rigid at a weight where glass would be unpleasant to move. Empty, the container weighs 700 g; full, almost everything you lift is rice, not plastic.

Capacity: 10.5L | Material: Food-grade clear PET | Weight: 24.69 oz (700 g) | MOQ: 3,000 pcs

Contact us for bulk pricing, sample arrangements and customization options.

One Job, Done Properly

Most large containers are sold as general-purpose boxes. This one is drawn around bulk staples - rice, flour, beans, oats, dry pasta - the things bought in a sack rather than a packet. That focus is why the opening, the depth and the closure are what they are: a container sized for one pour and then months of being opened and closed, not for sorting a dozen small items.

Four Edges Close Together

A lid that clips on two sides leaves the rest of the rim to hold itself flat, and the corners are where it gives way first. Here all four edges snap down in one action, so the gasket is compressed evenly around the perimeter - corners included. The seal does not depend on how hard the lid was pressed or which side was closed first.

What Actually Spoils Stored Rice

Four things, in the order households meet them: humidity, which makes it clump; air, which makes it stale; insects, which find an open bag long before they find a sealed one; and odour, which rice picks up from whatever sits beside it. A gasketed closure on a rigid body addresses all four at once. That is the reason to decant rice at all - not tidiness.

Check the Level, Not Just the Contents

Transparency is usually sold as "see what is inside". On a container this size the more useful version is different: you can see how much is left, so the reorder happens before the container runs empty instead of after. Opening a sealed container just to check quantity undoes the seal, and on a month of rice that happens often.

Stated Limits, On and In the Box

This container does not go in the microwave, and the page, the label and the instruction copy all say so. It is a dry-goods vessel for room-temperature storage. We would rather publish the limit than have a brand discover it through a return - and we can prepare the care and warning copy your market requires.

Discuss Customization

CAPACITY CONFIRMED AGAINST YOUR OWN BAG SIZE

Send us the sack weight your market actually sells - 5 kg, 10 lb, whatever the shelf standard is - and we will confirm what fits and how much headroom remains, in writing, before any order is placed.

THE CLOSURE IS TESTED BEFORE PRODUCTION

Lid closing force, gasket compression and repeated open-close cycles are checked on pre-production samples, so the four edges still seat correctly after months of daily use rather than only on the first attempt.

CARE COPY PREPARED FOR YOUR MARKET

The microwave statement, material declarations and cleaning instructions are written into artwork and manuals for your destination, so retail copy and the product's real capabilities never contradict each other.

SAMPLES APPROVED, THEN TOOLING

Samples are confirmed before any mould work begins, and quantities for a first programme are open to discussion. Nothing goes to tooling unverified.

ONE NAME BEHIND EVERY ORDER

Pre-sale questions, production updates, quality feedback and logistics exceptions all go to a named contact with agreed response times, under a defined compensation policy for confirmed defects.